3D printing allows users to bring their visions to life by turning them into tangible three-dimensional objects. 3D printing takes a computer-aided design (CAD) file and creates a physical model layer by layer using selected material(s) (commonly using polymers such as PLA and ABS).
** 3D printing is free for all SJSU students, faculty and staff.
Note:
1. There is a maximum limit of 1 print per month per person.
2. Due to high demand, we limit the duration of each print to 6 hours maximum.
3. You must use your valid SJSU email to use this service.
*You may call us at (408) 808-2435 or email us at librarytechtrainer@sjsu.edu
for additional information about printers, compatible files, and other technical questions.
Note: Our print schedule time is Monday thru Thursday 9:00 a.m. - 3:00 p.m.
1. All files must be submitted with proper dimensions (we only print at a 1:1 ration).
2. There is a maximum limit of 1 print per month per person
3. Maximum print duration allowed is 6 hours.
4. You must use a valid SJSU email to access this service.
Select an available date and time range by clicking the 'Schedule Your Print' tab. After choosing an open time slot, you will be prompted to enter your name, student or employee ID, and a valid SJSU email address to complete the reservation.
File Submission
1. Schedule a print Date / Time
2. "Upload your file using the print request form. Your file(s) must be either a "stl" file or a Gcode that has been sliced with Ideamaker software.
*Make sure your browsers is signed into your SJSU account. The form is restricted to SJSU domains only.
3. You will receive an email from librarytechtrainer@sjsu.edu when your part is ready for pickup!
* You are not required to be around for the printing process.
*You may email us at librarytechtrainer@sjsu.edu for additional information about printer filaments, compatible files, and other technical questions.